Selective Soldering Robot - RFS i1

Quantity:

Machine working concept:

PCB is moved by X/Y table with servo motor, Solder pot is moved in Z with servo motor, drop jet flux is moved in Z with aircylinder.

Selective Soldering Robot[RFS-i1] Features:

● Small footprint, only W990mm x D1308mm.

● Max board L350mm x W260mm (Can manually rotate board to 180degree to meet L700mm x W260mm).

● English Windows 10 interface.

● 3 servo motors and servo drivers for motion.

● Drop jet fluxer made in German.

● Solder pot system with capacity 15kgs.

● Wave height calibration system.

● Bottom IR preheating zone.

● “on-time” liver camera to show soldering process.

● Pre-maintenance count down function.

RFS-i1 Specifications
Item
General
Operating power/Max power	4KW/6.5KW
PCB dimension	50×50—350x260mm (Can manually rotate board to 180degree to meet L700mm x W260mm)
Machine dimension	W910mm x D1300mm X H1714MM
Net weight	400KG
Power supply	1PH 220V 50HZ MAX 30A Equip 40A contactor in factory
Air supply	3-5 bars
Exhausting required	200M3/h
Solder Management
Standard Solder Stations	1
Solder Pot Capacity	15 kgs
Heat-Up Time	About 40mins
Solder Pot heater	380 ℃
Solder Pot heater	1.2kw
Solder Nozzles
Mini Wave Nozzles	Dia 2 to 8mm
Customized nozzle	Available
Nozzle Material	Proprietary Alloy
(N2) Inertion Management
N2 heater	Standard Equipped
N2 Temp PID Control Range	0 – 300℃
N2 Consumption per Nozzle	1.5m3/H
Required N2 Purity	>99.99%
Flux Management
Spray Flux Nozzle	Standard equipped with drop jet nozzle made in Germany
Flux Capacity	1L
Flux Tank	Constant pressure tank
preheat
IR heater	2kw
Controlling System
Industrial PC	Yes
Typical Program Time	10 Minutes
Program method	Draw path in scanned picture of board
Controlling system	PC